Jiangsu All Molding New Material Co., Ltd

FOR USE AS A REDUCER

Step 1

Install the flooring plank. Then place the SlimTrack 3/8'' from the floor and screw it to the sub-floor using #6x5/8'' screws.

Step 2

Line the SlimTrim molding up with the SlimTrack and fit one end into the molding. Using a rubber mallet, tap the molding until it engages with the track. Use your hand to guide the molding into the track as you work your way down, tapping it in along the way.

Step 3

Next, go up and down the molding several times, tapping the Slim Trim all the way into the track. You can use a little more force once you are sure it is properly engaged in the track.