24hours@floorpartner.com
HomeProducts MOLDING & TRIM
    • Product category
    Recommend
    MOLDING & TRIM
    • SPC END CAP-01
      SPC END CAP-01
      Product Name：SPC Floor End Cap Size(mm)：2400*35*10mm Packing：25PCS/CTN Description: SPC floor end cap molding is used to create a smooth transition between a floor surface and carpet or a sliding glass door.
      Inquiry Now
    • SPC FLUSH STAIRNOSE-01
      SPC FLUSH STAIRNOSE-01
      Product Name: Flush Mount Stair Nose Size(mm): 2400*72*25mm Packing: 10 PCS/CTN Description Flush mount stair nose molding molding is used to finish the flooring at edge of a step to create a one-piece effect.
      Inquiry Now
    • SPC STAIRNOSE-01
      SPC STAIRNOSE-01
      Product Name: SPC Stair Nose Size(mm): 2400*55*17mm Packing: 10 PCS/CTN Description SPC Stair Nose Molding is used to finish the flooring at edge of a step to create a transition of the step edge. It’s easier to install compared flush stair nose.  
      Inquiry Now
    • SPC QUARTER ROUND-01
      SPC QUARTER ROUND-01
      Product Name：SPC Quarter Round Molding Size(mm)：2400*28*17mm Packing：30 PCS/CTN   Description SPC Quarter Round Molding is used to conceal small irregularities in your floor. There are always some places where the floor dips slightly, causing a gap where the floor meets the wall.
      Inquiry Now
    • WPC STAIRNOSE-01
      WPC STAIRNOSE-01
      Product Name: WPC Stair Nose Size(mm): 2400*55*18mm Packing: 10 PCS/CTN Description WPC Stair Nose Molding is used to finish the flooring at edge of a step with a tampering back solution. The advantage is it can suit floor with a range of different height
      Inquiry Now
    • SPC FLUSH STAIRNOSE-02
      SPC FLUSH STAIRNOSE-02
      Product Name: SPC Stair Nose Size(mm): 2400*81*35mm Packing: 8 PCS/CTN Description SPC Stair Nose Molding is used to finish the flooring at edge of a step to create a one-piece effect.
      Inquiry Now
    • SPC FLUSH STAIRNOSE-03
      SPC FLUSH STAIRNOSE-03
      Product Name: SPC Stair Nose Size(mm): 2400*113.5*25.5mm Packing: 8 PCS/CTN Description Flush mount stair nose molding molding is used to finish the flooring at edge of a step to create a one-piece effect.
      Inquiry Now
    • SPC SKIRTING-01
      SPC SKIRTING-01
      Product Name: SPC Skirting Size(mm):2400*82*15mm Packing: 10 PCS/CTN Description SPC wooden floor skirting is installed by pressing it down against the wall and nailing or gluing it tightly so it covers up the expansion gaps. Skirting also can be used along with quarter round. But skirting should be carefully chosen because different skirting height will make reduce the room height visually.
      Inquiry Now
    • WPC SKIRTING-01
      WPC SKIRTING-01
      Product Name: WPC Skirting Size(mm):2400*98*12mm Packing: 10 PCS/CTN Description WPC wooden floor skirting is installed by pressing it down against the wall and nailing or gluing it tightly so it covers up the expansion gaps. Skirting also can be used along with quarter round. But skirting should be carefully chosen because different skirting height will make reduce the room height visually.
      Inquiry Now
    • WPC QUARTER ROUND-01
      WPC QUARTER ROUND-01
      Product Name：WPC Quarter Round Molding Size(mm)：2400*28*15mm Packing：30 PCS/CTN   Description Square edge stair nose is used to conceal small irregularities in your floor. There are always some places where the floor dips slightly, causing a gap where the floor meets the wall.
      Inquiry Now
    • SPC REDUCER-01
      SPC REDUCER-01
      Product Name: SPC Reducer Size(mm): 2400*45*9mm Packing: 25 PCS/CTN Description SPC Reducer is used to create a little ramp that smoothes over the height difference between floors of different thicknesses.
      Inquiry Now
    • SPC REDUCER-02
      SPC REDUCER-02
      Product Name: SPC Reducer Size(mm): 2400*33*8mm Packing: 40 PCS/CTN Description SPC Reducer is used to create a little ramp that smoothes over the height difference between surface of different thicknesses.
      Inquiry Now
    12345 >
    CopyRight © 2013-2024   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet
    FriendLink: floor sample board flush mount stair nose